|
|
#215377
Fri Nov 26 2010 10:23 PM
|
Joined: Nov 2005
Posts: 37
Active Member
|
OP
Active Member
Joined: Nov 2005
Posts: 37 |
I just need the curved part for the top light, but I will but the whole manifold if I have too. Thanks, Mark
|
|
|
|
|
Joined: Feb 2003
Posts: 2,556 Likes: 46
Veteran Member
|
|
Veteran Member
Joined: Feb 2003
Posts: 2,556 Likes: 46 |
Mark, Welcome....Are you restoring the Cyclops version of this pump? That would be the one with the high top and the sight glass in the middle of the top? Those are the only MS80's that had a curved piece in the light manifold. It by passed the fuel manifold. I have simply used 1/2" black iron pipe fittings from Home Depot with short threaded pipe connectors and electrical lock nuts for positioning correctly, to build this piece. The hard part is getting the wire thru the bends once together. You might have good luck by inserting the wire while you assemble the conduit. It works best in my experience. Good luck, Paul www.severngaspumps.com
|
|
|
|
|
Joined: Nov 2005
Posts: 37
Active Member
|
|
OP
Active Member
Joined: Nov 2005
Posts: 37 |
Paul that is the piece Im looking for and thought about making it myself but if there was one floating around I would use it first. Thanks, Mark
|
|
|
|
|
Joined: Nov 2005
Posts: 37
Active Member
|
|
OP
Active Member
Joined: Nov 2005
Posts: 37 |
Thanks to all pointing me in the right direction... I bought one this afternoon. Mark
|
|
|
|
|
Joined: Sep 2003
Posts: 1,223 Likes: 15
Veteran Member
|
|
Veteran Member
Joined: Sep 2003
Posts: 1,223 Likes: 15 |
Thanks Mark, it's on its way. Tom.
Always buying gas pumps and parts. Visit my web site: www.gaspumps.usBuckles Vintage Gas Pump Parts LLC Carthage Indiana
|
|
|
|
|
|
|
