I agree I switched to HVLP recently and the difference is unbelievable. Some things I noted as I started using the new gun was a difference in pressure versus flow. With higher volume and lower pressure you have to make sure you have no significant loss of air flow through restrictions in the line. I changed to 3/8" hose versus the 1/4" I had used for years. I also changed the quick connect fittings to oversized which kept a minimum of 5/16" at the smallest place. You also must play with the pressure at the gun to achieve optimum flow of the liquid. I also had to watch viscosity of the liquid as the hvlp I am using likes a higher viscosity versus the Binks gun I used for years. I wish I had tried this years ago, but like many people I was afraid of change. Hope this helps....if you give more specific problems I might be able to help or know someone who does.....Rich B
