Oldgas.com Home  

Click here for Collectible Motor Oil Can auction listings


Home | Help | Events | Auctions | Parts | Pictures | Links | Contact
Previous Thread
Next Thread
Print Thread
Joined: Aug 2016
Posts: 49
Likes: 1
K
Kirk T Offline OP
Active Member
OP Offline
Active Member
K
Joined: Aug 2016
Posts: 49
Likes: 1
I don't have very good pictures of either pump. I will be taking better pictures and adding them. The first pump is a Hays Clock Face. I believe it is an AX 600 as picture in Jack's illustrated guide to gas pumps. The value listed there is 3500, my question is, do I have the pump identified correctly? Has the value changed much one way or the other since the book was printed?

The second pump is also a Hays also, I believe it is the 10 gallon visible 1923 listed in Jack's book at $1900. I should have taken a picture of the whole pump and will but all I have now is the tag with the serial number. Can anyone confirm via the serial number that I have identified correctly? Also I am very curious as to how this pump operated for there is no hole in any of the sides for a pump alarm. I'll try to get better pictures of both pumps posted.

image.jpeg
Hays Clock Face

image.jpeg
Hays Visible Tag


Kirk T.
"In God I Trust"
Value Questions and Showcase forums

Please - NO offers to Buy or Sell in this forum category

Statements such as, "I'm thinking about selling this." are considered an offer to sell.
Joined: Aug 2016
Posts: 49
Likes: 1
K
Kirk T Offline OP
Active Member
OP Offline
Active Member
K
Joined: Aug 2016
Posts: 49
Likes: 1
A few more pictures of the Hays visible pump. It doesn't look to me like it ever had rods between the top and bottom of the glass mount. That probably is a clue to help identify the model?

image.jpeg image.jpeg image.jpeg image.jpeg

Kirk T.
"In God I Trust"
Joined: Aug 2016
Posts: 49
Likes: 1
K
Kirk T Offline OP
Active Member
OP Offline
Active Member
K
Joined: Aug 2016
Posts: 49
Likes: 1
A few more pictures hopefully to help identify the Hays visible

image.jpeg image.jpeg image.jpeg image.jpeg

Kirk T.
"In God I Trust"
Joined: Nov 2008
Posts: 1,627
D
Veteran Member
Offline
Veteran Member
D
Joined: Nov 2008
Posts: 1,627
Pm sent

Joined: Oct 2007
Posts: 12,293
Likes: 14
Veteran Member
Offline
Veteran Member
Joined: Oct 2007
Posts: 12,293
Likes: 14
Clockface is an AX-600C, cash computer pump. The visible is simply known as a "Hays" visible without a number designation. They did not use threaded rods to hold the cylinder in place, and instead used a threaded nut on top of the center pipe to hold the cylinder in place. There should be a cast iron top for it that simply "sat in place" with nothing but gravity holding it in place!


Everything Cities Service
Specializing in old Gas Pumps
kwfrith@gondtc.com
Cell#-701-739-6133

Moderated by  Oldgas 

Link Copied to Clipboard

Copyright © 2025 Primarily Petroliana Interactive, All Rights Reserved

Powered by UBB.threads™ PHP Forum Software 7.7.5