Doug,
It won’t be flush. It looks like you have the correct rubber too. If it is ‘S’ shaped window trim, you just have it on wrong. You have the ad glass where the metal should be and the metal where the ad glass should be. In other words the rubber is facing out the correct way, you just need to take the glass out, move the rubber back one ‘notch’ and put the add glass in the back (recessed in). You will have to flip the rubber around so the grooves are correct, but keep the the rubber facing the same way (large curvy part towards the outside of the pump). It actually works both ways, but the larger side out looks better and is the way it was done back in the day.
-Steve
Last edited by Speedracer; Thu Jan 02 2020 12:55 AM.
