Primarily Petroliana Shop Talk Forums Shop Talk Petroliana Forums General Petroliana Discussion Wayne 800/Williams Gas-O-gun nozzle id

Can anyone identify what pump this Williams Gas-O-Gun (with "ears") was used? Working on a Wayne 800 whose nozzle holder accepts a Gas-O-Gun with "ears". Thought I had the right nozzle but because of the flange as shown in the pictures (indicated by the pointer) the nozzle is prevented from moving further into the nozzle hole assembly. Any thoughts? My initial thinking was to cut off the flange, but I hate to alter something that's not so common, especially if my nozzle is designed for a specific pump. Dilemma! Thanks, Bob.
cell # 443 570 7018 in case anyone would like to text or chat. Good technical conversation is always stimulating and welcome.

They were used on the Boyle Dayton and Wayne 70-80 series. Richard

Richard, thanks for the info. Should I trim off the flange???

This is very interesting that these were “keyed” to different style pumps. thanks for starting this thread!!

I have a similar nozzle that I’ve had for years but only marked ST LOUIS and Pat Appld For. I’m curious if GasOGun was the original patent holder and other companies licensed the design or maybe the other way around? does anyone know more history about the company/design?

Thanks for your input and some direction. Sent you a PM with some other thoughts. Bob

That nozzle is for an American pump with the two nubs on the side. That is how you hang them on an American pump.